Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(DG) ST50
05-03-18, 09:07 AM (This post was last modified: 05-03-18 10:33 AM by Derek - Raymarine - Moderator.)
Post: #1
(DG) ST50
I inherited an all Autohelm package. The wind transducer was bad so replaced it with R28170. The head does not have a calibrate button. In it's place is the selector from apparent to true.
How does one calibrate it? Not as concerned about wind speed as I understand it isn't going to be accurate but direction is important to me.
Thank you.
Find all posts by this user
Quote this message in a reply
05-03-18, 10:40 AM (This post was last modified: 05-03-18 10:40 AM by Derek - Raymarine - Moderator.)
Post: #2
RE: (DG) ST50
Hi sailingriki

thank you for your enquiry

The ST50 range had a slightly different calibration access to align wind angle, in your other post I outlined the method to getting wind on the bow to make calibration of direction easier.

Attached is the page from the ST50 handbook on how to access calibration.

[Image: attachment.php?aid=1828]

regards


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)