Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Dsm300 and airmar tm265lh
05-06-18, 05:08 PM (This post was last modified: 05-08-18 10:15 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] Dsm300 and airmar tm265lh
Hello, the hull I purchased is fitted with an airmar tm265lh. I am installing my Raymarine package with a dsm300 and pair of c97 displays. Is it possible to use this transducer?
Find all posts by this user
Quote this message in a reply
05-08-18, 10:25 AM
Post: #2
RE: [CA] Dsm300 and airmar tm265lh
Welcome to the Raymarine Forum Iwhitevt,

The TL265LH CHIRP transducer is not compatible with 50kHz / 200kHz fishfinder sounders modules (ex. CP370, CP300, DSM30, DSM300, DSM250). Raymarine's 50kHz / 200kHz fishfinder sounders modules are compatible with the transducers found here. While it may be possible to interface the TL265LH CHIRP transducer to a CP470 CHIRP Sounder Module, which in turn may be interfaced to the MFD, it would be recommended that Airmar be consulted prior to making any purchases. Raymarine only supports the use of the CP470 with Raymarine branded CHIRP transducers (also produced by Airmar).
Find all posts by this user
Quote this message in a reply
05-08-18, 01:17 PM
Post: #3
RE: [CA] Dsm300 and airmar tm265lh
Okay, thanks!!
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)