Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Axiom 9 to Ray 50, connections needed
05-09-18, 02:34 PM (This post was last modified: 05-11-18 12:39 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA] Axiom 9 to Ray 50, connections needed
I have the Axiom 9 and just got a Ray50 VHF.

Now I want to network them to share the GPS.

My parts list:

Two nmea 2000 T's
Two termination ends
One A06045 Adapter cable to convert the SeaTalkNG cable on the Ray50 to nmea 2000

The power/network cable on the Axiom is already 2000?

Please correct me!
Find all posts by this user
Quote this message in a reply
05-11-18, 12:36 PM (This post was last modified: 05-11-18 12:39 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA] Axiom 9 to Ray 50, connections needed
Welcome to the Raymarine Forum Bruce,

It is recommended that NMEA 2000 backbones be constructed from NMEA 2000 networking components from a single manufacturer. Raymarine offers NMEA 2000 networking adapters to permit third party devices to be interfaced as spurs to a NMEA 2000 backbone which has been constructed from Raymarine SeaTalkng Networking components.

The Axiom 9 MFD and Ray50 MFD will each be interfaced as an individual spur to a powered and properly terminated SeaTalkng / NMEA 2000 backbone. For the benefit of you and others who may be viewing this thread, please click here to view a FAQ addressing how to construct a simple backbone. As the NMEA 2000 port of the Ray50 has been terminated with a SeaTalkng spur socket, the VHF radio's spur socket may be interfaced to a spur socket within the backbone by using an appropriate length of SeaTalkng spur cable. As the NMEA 2000 port of Axiom MFDs have been terminated with a DeviceNet Micro-C (M), plug, a A06075 39.4in (1.0m) DeviceNet Female to SeaTalkng Spur Adapter may be used to mate the MFD's NMEA 2000 socket to a spur socket within the backbone.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)