Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] AXIOM 12 with AIRMAR B164
05-15-18, 02:39 PM (This post was last modified: 05-16-18 11:38 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA] AXIOM 12 with AIRMAR B164
Chuck, thank you very much for your expert help.

I'm still a little confused though. The transducer is currently connected to a DSM300 (I'm including a picture of the connector) which in turn is connected to the E120 via a SeaTalk / ethernet type cable.

Does this mean I keep on using the DSM300 even though the Axiom has its own sonar?

I called Raymarine yesterday and was told that I needed Adaptor Cable A80488 to connect the Airmar 164B-20 directly to the Axiom. But you are recommending to use Adaptor Cable A80489.

So, I'll go ahead and order the A80489 as well and return the other one then.

Thanks again and pardon my ignorance on the subject
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
RE: [CA] AXIOM 12 with AIRMAR B164 - rarambarri - 05-15-18 02:39 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)