The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Fishfinders v / [TG11] DragonFly 4S Will Not Power Up

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG11] DragonFly 4S Will Not Power Up
05-15-18, 06:49 PM (This post was last modified: 05-17-18 01:35 PM by Chuck - Raymarine - Moderator.)
Post: #1
tpbradysr@gmail.com Offline
Junior Member
**
 		Posts: 18
Joined: May 2016
Reputation: 0
[TG11] DragonFly 4S Will Not Power Up
I just installed my DragonFly 4S after using it last fall and it will not power up. After troubleshooting the connector, I can find no pin with 12VDC on it. I have verified there is 12VDC input on the red power lead and can identify the ground in the connector. Is there a pin out for the connector to know for certain which pin should have 12VDC on it? Is it possible to get a replacement wiring harness?

Tom
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] DragonFly 4S Will Not Power Up - tpbradysr@gmail.com - 05-15-18 06:49 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication