Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Size replacement for C80
05-01-19, 12:42 PM (This post was last modified: 05-01-19 02:26 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Size replacement for C80
Hi,
My buddy has a C80 mounted IN dash (Flush) of his Mainship M/Y. he is looking at upgrading to a new MFD. is there any Raymarine MFD's that would fit into the same mounting area that the C80 is currently in?
Thanks
Find all posts by this user
Quote this message in a reply
05-01-19, 02:36 PM
Post: #2
RE: [CA11] Size replacement for C80
Welcome back to the Raymarine Forum unixdood,

It would typically be recommended that an Axiom 9 or Axiom 9RV MFD be considered as a replacement for C80 MFD. The installation template these MFDs (also includes dimensional data for the MFD's cutout and footprint) may be found here. Raymarine also now offers the A80564 C80/E80 to Axiom 9 Adapter Plate. Please additionally click here to view a FAQ addressing replacement of a C-Series Classic MFD with an Axiom MFD.
Find all posts by this user
Quote this message in a reply
07-09-19, 05:41 AM
Post: #3
RE: [CA11] Size replacement for C80
Thanks for the reply! Ill grab that setup then!
Find all posts by this user
Quote this message in a reply
07-15-19, 06:00 PM
Post: #4
RE: [CA11] Size replacement for C80
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)