[CA11] Axiom Pro 12 - Navionics Platinum plus issue
|
05-30-18, 10:04 AM
Post: #2
|
|||
|
|||
RE: [CA11] Axiom Pro 12 - Navionics Platinum plus issue
Welcome to the Raymarine Forum West32,
Raymarine is currently investigating problems associated with Navionics cartography when used with Axiom and Axiom Pro MFDs running LightHouse 3 v3.3.170 or v3.4.66 software. Navionics cartography access/viewing problems related to software design errors are expected to be corrected within the LightHouse 3 v3.5.xx software update currently scheduled for mid to late Q3. One symptom is failure of the Axiom Pro MFDs to access or share Navionics cartography which is present within the reader of one of the system's Axiom Pro MFDs. In systems featuring an Axiom MFD, eS-Series MFD, or gS-Series MFD in addition to an Axiom Pro MFD, it is recommended that the chart card be moved from the Axiom Pro MFD to one of these other MFDs, which will in turn share the cartography with the Axiom Pro MFD. The reported issue may also result from a problem with the Navionics chart card media and/or the cartography stored on the chart card. Testing the chart card with another Axiom Pro MFD running the same software and achieving similar results would rule out any hardware problems with the MFD's memory card reader. In the case of systems featuring an Axiom MFD, eS-Series MFD, or gS-Series MFD in addition to an Axiom Pro MFD, testing the chart card within these MFDs would be advised. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Axiom Pro 12 - Navionics Platinum plus issue - West32 - 05-28-18, 08:53 PM
RE: [CA11] Axiom Pro 12 - Navionics Platinum plus issue - Chuck - Raymarine - Moderator - 05-30-18 10:04 AM
|
User(s) browsing this thread: 1 Guest(s)