[CA] [CA11] Tilt data box on i70s
|
06-01-18, 09:50 AM
(This post was last modified: 06-01-18 10:09 AM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
RE: [CA11] Tilt data box on i70s
Welcome to the Raymarine Forum rsqunit,
Please note that I have been unable to duplicate the reported issue with my system (all STng) and that an i70S operating with the latest software (v3.11) supports the following data items from the EV-1 (2.18): - Boat->Roll - Boat->Pitch - Boat->Heading - Boat->ROT (Rate of Turn) "Tilt" is not listed as a data item. Is the i70S interfaced as a spur to the SeaTalkng backbone or has it been interfaced to a SeaTalk bus which in turn has been interfaced to a SeaTalk to SeaTalkng Converter? When the About System diagnostics feature (MENU->SET-UP->DIAGNOSTICS->ABOUT SYSTEM) is commanded on the i70S, is the EV-1 CCU listed? |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] Tilt data box on i70s - rsqunit - 06-01-18, 12:53 AM
RE: [CA11] Tilt data box on i70s - Chuck - Raymarine - Moderator - 06-01-18 09:50 AM
RE: [CA11] Tilt data box on i70s - rsqunit - 06-03-18, 04:05 PM
RE: [CA11] Tilt data box on i70s - Chuck - Raymarine - Moderator - 06-04-18, 08:04 AM
|
User(s) browsing this thread: 1 Guest(s)