Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Getting speed on my chart display
06-01-18, 10:21 AM (This post was last modified: 06-01-18 02:51 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Getting speed on my chart display
I recently bought a boat with a raymarine e95. I searched the forums, but I cannot find the answer to this. My chart page only shows depth, and I cannot figure out how to add other data windows. I really just want speed, but cannot figure out how to add anything. I can configure the data page by long pressing on the display, but that only tries to create a waypoint on the chart screen, and when I long press on the customization page, it only brings up a window, but no list of options?

I am sure there is something simple I am missing, but i have played with it for a long time and cannot figure this one out.. Thanks for any help
Find all posts by this user
Quote this message in a reply
06-01-18, 03:28 PM
Post: #2
RE: [CA11] Getting speed on my chart display
Welcome to the Raymarine Forum kmirabil,

Please click here to view a FAQ addressing this subject.
Visit this user's website Find all posts by this user
Quote this message in a reply
06-01-18, 09:32 PM (This post was last modified: 06-04-18 08:07 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] Getting speed on my chart display
Thanks, I had seen that forum but didnt see the section that spoke to what I was looking for. Problem solved, perfect. Thank you!
Find all posts by this user
Quote this message in a reply
06-04-18, 08:08 AM
Post: #4
RE: [CA11] Getting speed on my chart display
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)