Raymarine forum / Raymarine Forums / AIS v / [CA] [CA11] Using proAIS2 with AIS500 transceiver

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Using proAIS2 with AIS500 transceiver
06-08-18, 08:36 PM
Post: #7
dantos Offline
Junior Member
**
 		Posts: 9
Joined: Apr 2018
Reputation: 0
RE: [CA11] Using proAIS2 with AIS500 transceiver
Chuck,

One other question I should have asked before I head to the boat tomorrow - I saw a post on this forum - as follows:

"Reply by Moderator - Raymarine, US on July 25, 2014 at 4:54pm
Welcome to the Raymarine Technical Forum Peter,

If you own an AIS500, then the ProAIS software may be used to configure the AIS500's static data. If you own an AIS650, then the ProAIS2 software may be used to configure the AIS650's static data."

Is the ProAIS2 software that I installed going to be backwards compatible with the AIS500 unit? If not, how do I find the ProAIS - the older software that is compatible with the AIS500?

Thanks so much,

David
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Using proAIS2 with AIS500 transceiver - dantos - 06-08-18 08:36 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication