Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] New wireless remote but no seatalk port available on course computer
06-04-18, 05:44 AM (This post was last modified: 06-04-18 03:33 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] New wireless remote but no seatalk port available on course computer
Hello,
I've bought a new wireless remote for my spx5 autopilot but realized that the 2 seatalk pins are used ; can I plug two items at the same pins ; I mean in parallel?
Thank you for your support
Find all posts by this user
Quote this message in a reply
06-04-18, 04:12 PM
Post: #2
RE: [CA11] New wireless remote but no seatalk port available on course computer
Welcome to the Raymarine Forum s2fast4u,

The S100 and SmartController wireless base stations feature a SeaTalk communications interface. Devices featuring a SeaTalk communications interface may be installed in any order within a daisy chain or may be installed in a parallel manner. SeaTalk cables can be joined using D244 SeaTalk Junction Blocks, splices, marine grade terminal strips, or R55006 SeaTalk Auxiliary Junction Boxes. SeaTalk cable is available in 15", 1m, 3m, 5m, and 9m lengths (D230, D284, D285, D286, and D287 respectively. In your case, you may want to consider using R55006 SeaTalk Auxiliary Junction Box or a terminal strip rather than trying to insert more then one set of wires into the jaws of autopilot course computer's SeaTalk connectors.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)