Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] C120 displays
06-07-18, 10:17 AM (This post was last modified: 06-07-18 10:25 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] C120 displays
Can two C120 displays be connected together through SeaTalk?
Find all posts by this user
Quote this message in a reply
06-07-18, 10:25 AM
Post: #2
RE: [CA11] C120 displays
Welcome back to the Raymarine Forum Eirinnrose,

Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
06-07-18, 02:28 PM (This post was last modified: 06-08-18 09:05 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] C120 displays
Thanks for the information, Can you run two C120 MFD's using radar on one and a chart on the other, or split the screen on with with a fish finder?
Find all posts by this user
Quote this message in a reply
06-08-18, 09:10 AM
Post: #4
RE: [CA11] C120 displays
Eirinnrose,

Q1. Can you run two C120 MFD's using radar on one and a chart on the other?
A1. Yes. That said, radar imaging will only be available on the C-Series Classic MFD which has the radar transducer's cable directly connected to the MFD's RADAR socket. Similarly, Navionics cartography may only be viewed on the C-Series Classic MFD which have the Navionics chart card within its reader.

Q2. or split the screen on with with a fish finder?
A2. Yes. Fishfinder imaging will only be visible on the C-Series Classic MFD which has the DSM's cable directly connected to its DSM socket.
Find all posts by this user
Quote this message in a reply
06-08-18, 09:26 AM (This post was last modified: 06-08-18 09:38 AM by Chuck - Raymarine - Moderator.)
Post: #5
RE: [CA11] C120 displays
Thanks Chuck, much appreciated.
Find all posts by this user
Quote this message in a reply
06-08-18, 09:38 AM
Post: #6
RE: [CA11] C120 displays
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)