Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] How do you program COG Line on Axiom?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] How do you program COG Line on Axiom?
06-18-18, 03:26 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] How do you program COG Line on Axiom?
Welcome to the Raymarine Forum Doug,

As vectors are associated the vessel icon, holding one's finger pressed atop the vessel icon within the Chart application will cause a vessel icon context menu to be displayed. From this context menu, the operator may select to display the COG (vessel must be moving) and/or Heading (system must be interfaced to a heading source) vectors as well as to configure the length of these vectors.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] How do you program COG Line on Axiom? - Chuck - Raymarine - Moderator - 06-18-18 03:26 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication