Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] New equipment information
06-29-18, 09:01 AM
Post: #10
RE: [CA11] New equipment information
Lance,

Q1. Will all the features of these radars work with and Plug directly into the Axiom Pro 9 RVX? I know the Wi-Fi will connect. Or is a Networking system needed?
A1. The Axiom Pro MFDs feature two Ethernet communications sockets, permitting up to two compatible devices having an Ethernet communications interface to be interfaced to the MFD without need for installing a HS5 RayNet Network Switch. Quantum Data cables or Digital Radar Cables terminated with a RayNet (F) plug are designed to be directly mated the MFD's Ethernet socket.

Q2. The Boat has 4 Rocket launcher rod holders located on the rear top of the roof that will have rods standing up in them when travelling. Will that interfere with the image return?
A2. Not typically. However, you may want to consider installation of a radar mount to raise the radome above the height of the rocket launchers.

Q3. Does being networked or Wi-Fi connected have any advantages over one and another? Other than having to run a cable or not.
A3. Negative.

Q4. Does the Quantum 2 Q24D (Doppler) have WI-FI. It says on the Raymarine web page "Quantum 2 with Doppler can be installed in a traditional wired configuration, or use its built-in Wi-Fi technology to connect it to your Raymarine MFD." But I cannot find an ordering option for WI-FI.
A4. Unlike the Quantum radome which is offered in a variant which includes both a wired communications interface with a Wi-Fi communications interface and a Wi-Fi only variant, the Quantum 2 Q24D is exclusively manufactured with wired communications interface with a Wi-Fi communications interface ... hence there is only one model of Quantum Q24D offered.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] New equipment information - Chuck - Raymarine - Moderator - 06-29-18 09:01 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)