Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] DSM360 Problems
07-06-18, 08:53 AM
Post: #6
RE: [CA11] DSM360 Problems
Ray,

Should you not have installed the supplied power cable with the supplied power cable then it is strongly recommended that this action be taken. Should all of the equipment be powered on and the DSM's Status LED not be flashing green at 1Hz after all equipment has completed startup initialization, then the Status LED's flash code reported may be indicative of a problem with the SeaTalkhs networking components (cables, crossover coupler, SeaTalkhs Network Switch, or within the MFD or DSM's Ethernet (SeaTalkhs) networking circuitry. Should the Ethernet network consist of other compatible devices having an Ethernet communications interface (ex. other E-Series Classic MFDs, SR100/SR6 Sirius Satellite Wx/Radio receiver, Digital/HD Digital Radome, or HD/Super HD open array radar) and the MFD be can communicate with these devices, then it would absolve the MFD and the networking components linking the MFD to these devices from having any issues.

Should you need onboard assistance, you may want to consider contacting a Certified Raymarine Installer.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] DSM360 Problems - seeray96 - 06-18-18, 12:12 PM
RE: [CA11] DSM360 Problems - seeray96 - 06-25-18, 12:19 PM
RE: [CA11] DSM360 Problems - seeray96 - 07-05-18, 03:48 PM
RE: [CA11] DSM360 Problems - Chuck - Raymarine - Moderator - 07-06-18 08:53 AM
RE: [CA11] DSM360 Problems - seeray96 - 07-11-18, 03:39 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)