Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Evolution sensor core and AC interference

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Evolution sensor core and AC interference
07-16-18, 07:58 AM (This post was last modified: 07-16-18 08:00 AM by Chuck - Raymarine - Moderator.)
Post: #5
ddfour1 Offline
Zamboati
***
 		Posts: 66
Joined: Feb 2016
Reputation: 0
RE: [CA11] Evolution sensor core and AC interference
OK--I switched the power source for the STNG network (and thus AP control head) over to the house side. Reset the AP. Performed the dockside wizard which went fine and then did two cruises including a multiple figure 8's between 3 and 10 kts. The Detecting Magnetics indicator is still showing and has not advance much at all.


The auto-pilot was previously working at its current installation location without showing the Detecting Magnetics indicator so unclear why that is a problem now.

Software on my Axiom is 3.4.66. Software on the p70Rs control head is 3.07.

Thanks,

Dave
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Evolution sensor core and AC interference - ddfour1 - 07-16-18 07:58 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication