Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Evolution sensor core and AC interference

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Evolution sensor core and AC interference
07-17-18, 08:57 AM
Post: #10
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Evolution sensor core and AC interference
Dave,

Q. Can you please confirm that after I run the Pilot Factory Reset and re-do the dockside wizard, but before I go for the cruise to re-build the deviation tables that it is normal for the AP control head to not indicate any deviation value? It just says "---".
A. Until the autopilot has completed detecting magnetics via the cruise, the reported deviation value will be ---. This may also be indicative of not having initially performed a Pilot Factory Reset earlier.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Evolution sensor core and AC interference - Chuck - Raymarine - Moderator - 07-17-18 08:57 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication