Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Replacing ST60's
06-29-18, 11:28 AM
Post: #2
RE: [CA11] Replacing ST60's
Welcome to the Raymarine Forum Todd,

An A06049 SeaTalkng Power Cable would typically be recommended for this purpose. That said, it is indeed technically possible to splice the power leads of the extra SeaTalkng Spur Cable to the currently installed SeaTalk cable which is currently powering the ST60 instruments. To perform the splice, simply pair the SeaTalkng Spur cable's red lead with the SeaTalk Cable's power (red) lead and pair the SeaTalkng Spur Cable's ground (black) lead with the SeaTalk Cable's shield lead.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Replacing ST60's - ToddL214 - 06-26-18, 08:46 AM
RE: [CA11] Replacing ST60's - Chuck - Raymarine - Moderator - 06-29-18 11:28 AM
RE: [CA11] Replacing ST60's - ToddL214 - 06-30-18, 10:35 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)