Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Depth Transducer Offset
07-02-18, 12:27 PM (This post was last modified: 07-03-18 10:15 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Depth Transducer Offset
I have a NMEA 2000 depth transducer on the network, NOT a Raymarine Sonar Module, and an Axiom 9 PRO. The Axiom reads the data but I can't seem to calibrate/configure it. How can I go about accessing and setting the transducer offset with the Axiom/Lighthouse?

Thanks,
Ryan
Find all posts by this user
Quote this message in a reply
07-03-18, 10:23 AM
Post: #2
RE: [CA11] Depth Transducer Offset
Welcome to the Raymarine Forum rroberts76,

Please click here to view a FAQ addressing this subject. As indicated therein, Raymarine's MFD running LightHouse II or LightHouse 3 software, i50 Instruments, i60 Instruments, and i70 MFIDs are not designed to calibrate, apply offsets in conjunction with, or configure alarms in conjunction with third party NMEA 2000 sensors.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)