The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.3.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error

Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Waypoint/Route/Track question
07-05-18, 05:12 PM (This post was last modified: 07-06-18 02:22 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Waypoint/Route/Track question
Hi All,

Using the es127 MFD or Voyageplanner software, it's extremely easy load/transfer waypoints for our favorite reefs spots.

In the Gulf of Mexico, there are stretches of live/natural/hard bottom that may extend for 10 or 15 miles in length.

What would be the best way to indicate this area on the MFD via a straight line (where I know natural bottom falls to the left and right)? Set up a route or track in voyageplanner and export to the MFD? I would prefer to avoid using a top waypoint and bottom waypoint, but I suppose if that is the best solution it will work.

Any advice or experience with this situation is greatly appreciated!

Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
[CA11] Waypoint/Route/Track question - SeanC - 07-05-18 05:12 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)