The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / Pilot Control Dialog

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Pilot Control Dialog
04-16-16, 11:39 AM (This post was last modified: 04-18-16 08:12 AM by Steve - Raymarine - Moderator.)
Post: #1
jeokeefe@gmail.com Offline
Junior Member
**
 		Posts: 39
Joined: Mar 2016
Reputation: 0
Pilot Control Dialog
I have come across what I believe is a issue with the Pilot Control Dialog. After I acknowledge the Waypoint Arrival Alarm on the p70r and the alarm is silenced, the "Pilot Control Dialog" pops-up and remains on the screen for 5 seconds ON ALL SCREENS covering up vital engine data and radar data.

Is there a way to make this dialog disappear immediately and automatically after the arrival alarm is silenced? It pops up on all 3 displays and covers up 1/3 of the display when it is open. When slowing down or turning I cant see my engine data (on one of the displays) and the radar on the other. Please advise.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Pilot Control Dialog - jeokeefe@gmail.com - 04-16-16 11:39 AM
RE: Pilot Control Dialog - jmk - 06-14-17, 02:03 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication