Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG11] Vovlo Penta Engine Data on Raymarine Axiom 12
07-10-18, 01:59 PM (This post was last modified: 11-21-18 02:01 PM by Chuck - Raymarine - Moderator.)
Post: #1
[TG11] Vovlo Penta Engine Data on Raymarine Axiom 12
Hi,
How do I connect my Vovlo Penta engine data to my Raymarine Axiom 12? What type of cables do I need to connect it to the NMEA2000 Backbone?
Thanks
Mike
Find all posts by this user
Quote this message in a reply
07-18-18, 02:53 AM (This post was last modified: 11-21-18 02:02 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [TG11] Vovlo Penta Engine Data on Raymarine Axiom 12
Hi Mike,

If your Volvos are new enough and supported models, you can do this either with a Volvo/CPAC NMEA2000 Gateway or a Raymarine ECI100. ECI100 connection details, supported data and supported models are all at http://www.raymarine.com.au/view/?id=8883.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
11-21-18, 12:25 PM (This post was last modified: 11-21-18 02:02 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [TG11] Vovlo Penta Engine Data on Raymarine Axiom 12
Thank you Tom. And sorry for the late reply.
will i need one for each engine?
Thanks
Mike
Find all posts by this user
Quote this message in a reply
11-21-18, 11:26 PM
Post: #4
RE: [TG11] Vovlo Penta Engine Data on Raymarine Axiom 12
Hey Mike, no problem.

No, you should only need one gateway which will relay data from both engines. For anyone else reading this, the rule is, one engine gateway for each engine CANbus network. Some engine manufacturers require separate networks for each engine and so need separate engine data gateways, but Volvo use a single network and hence a single gateway.

Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
04-09-20, 10:08 PM (This post was last modified: 04-10-20 08:28 AM by Chuck - Raymarine - Moderator.)
Post: #5
RE: [TG11] Vovlo Penta Engine Data on Raymarine Axiom 12
I like to look at the link you supposed but I do not have access to it(?)
Find all posts by this user
Quote this message in a reply
04-13-20, 10:02 PM
Post: #6
RE: [TG11] Vovlo Penta Engine Data on Raymarine Axiom 12
Hello RonnieCa,

Sorry, an update to our website has broken that link. Try this one: https://www.raymarine.com.au/view/index-id=8883.html, or go to https://www.raymarine.com and go to Products > Multifunction Navigation > Accessories and peripherals > Engine Interfacing.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
04-14-20, 05:48 AM (This post was last modified: 04-14-20 07:21 AM by Chuck - Raymarine - Moderator.)
Post: #7
RE: [TG11] Vovlo Penta Engine Data on Raymarine Axiom 12
Hi Tom,

Thank you! Would you happen to know what part numbers I would need to complete this task, please?

Thanks

Mike
Find all posts by this user
Quote this message in a reply
04-19-20, 07:06 PM
Post: #8
RE: [TG11] Vovlo Penta Engine Data on Raymarine Axiom 12
Hello Mike,

As we don't supply the Volvo NMEA2000 gateway I don't have a part number for that, but the cabling part numbers for connection via our ECI100 (part E70227) instead are all on that engine interfacing page that I linked to, along with connection drawings.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)