Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Axiom Pro 12 - real vision issue
07-11-18, 07:43 AM (This post was last modified: 07-24-18 07:36 AM by Chuck - Raymarine - Moderator.)
Post: #1
[TG11] Axiom Pro 12 - real vision issue
Wondering what I have wrong with my Real vision 3d setup.

I have the dual transducers mounted under the boat on each side of the keel.

When I go to the 3d screen, the bottom is shown, but is only a thin strip down the middle. This is the case whether I am in my slip or in 80 fow.


The attachment is a capture from your website. Mine only shows out the 25ft on each side of the boat.

I'll try to get a capture next time I'm out.

Any idea if I have a setting wrong?

1999 Sea Ray 370 Express Cruiser Hardtop
Twin 8.1 Horizons, ZF Hurth Transmissions,
Axiom Pro 12
Axiom 12
Quantum II Radar
Real Vision 3D
1kW CHIRP sonar
B275 Transducer
Ray 60 VHF
ACU 150 Autopilot
P70R
Smart Remote

https://photos.app.goo.gl/UKDm91zlSwlPhCQ12
Visit this user's website Find all posts by this user
Quote this message in a reply
07-18-18, 10:07 PM (This post was last modified: 07-24-18 07:36 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [TG11] Axiom Pro 12 - real vision issue
The simplest explanation is that your current range setting is a bit narrow. The default Auto Range setting doesn't suit everybody (including me, actually), so I would suggest going into the menu, setting Range to Manual and ranging out a bit.

If that doesn't get you what you're after, send us some clear, high-resolution, full-screen photos of the sounder screen showing what you're seeing so that we can give you a more in-depth answer.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
07-23-18, 01:26 PM (This post was last modified: 07-24-18 07:37 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [TG11] Axiom Pro 12 - real vision issue
Tom

Here is an actual pic of my screen. Let me know if you need an actual screen shot

Eric

1999 Sea Ray 370 Express Cruiser Hardtop
Twin 8.1 Horizons, ZF Hurth Transmissions,
Axiom Pro 12
Axiom 12
Quantum II Radar
Real Vision 3D
1kW CHIRP sonar
B275 Transducer
Ray 60 VHF
ACU 150 Autopilot
P70R
Smart Remote

https://photos.app.goo.gl/UKDm91zlSwlPhCQ12
Visit this user's website Find all posts by this user
Quote this message in a reply
07-25-18, 10:46 PM
Post: #4
RE: [TG11] Axiom Pro 12 - real vision issue
Hello Eric,

Yes, that range is a bit narrow, I think you need to put the RV-3D into manual range and go out a couple of steps. Other than that, your images look great.

Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
07-26-18, 04:04 PM
Post: #5
RE: [TG11] Axiom Pro 12 - real vision issue
(07-25-18 10:46 PM)Tom - Raymarine - Moderator Wrote:  Hello Eric,

Yes, that range is a bit narrow, I think you need to put the RV-3D into manual range and go out a couple of steps. Other than that, your images look great.

Tom

Perfect

Thanks

1999 Sea Ray 370 Express Cruiser Hardtop
Twin 8.1 Horizons, ZF Hurth Transmissions,
Axiom Pro 12
Axiom 12
Quantum II Radar
Real Vision 3D
1kW CHIRP sonar
B275 Transducer
Ray 60 VHF
ACU 150 Autopilot
P70R
Smart Remote

https://photos.app.goo.gl/UKDm91zlSwlPhCQ12
Visit this user's website Find all posts by this user
Quote this message in a reply
07-27-18, 12:01 AM
Post: #6
RE: [TG11] Axiom Pro 12 - real vision issue
No problem.

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)