The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.3.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error

Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Trip distance settings
07-13-18, 08:44 AM (This post was last modified: 07-16-18 06:09 PM by Chuck - Raymarine - Moderator.)
Post: #1
[TG11] Trip distance settings
I have a es128 (w/current SW update), rs130 gps sensor, HD radar, ev150 autopilot, flir cam (m100), Sirius weather, and a dsm300. The trip distance was working fine. The DSM transducer (p66) was causing some interference with the cpt 100 transducer when running both transducers. I pulled the fuse on the dsm300(which corrects the interference) and am using it as a backup at this point. The trip will no longer display or calculate on the mfd. I’m assuming because it was pulling data from the p66. How do I set the mfd to calculate/display the trip off the mfd/gps? I’m sure it’s a setting but I can’t find it.
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
[TG11] Trip distance settings - rltrbill - 07-13-18 08:44 AM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)