[CA11] a125 reboots on second card insertion

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] a125 reboots on second card insertion

07-15-18, 03:54 PM (This post was last modified: 07-16-18 10:54 AM by Chuck - Raymarine - Moderator.)

Post: #1

jdiesel Offline

Junior Member

Posts: 13
Joined: Apr 2017
Reputation: 0

[CA11] a125 reboots on second card insertion

I have an a125 MFD.
One slot is populated with a Navionics card.
I want to use the second, for backup, tracks, etc.

As I insert the second card, 4gb or 8gb, formatted FAT32 and clean, the a125 sits there - looking dead for about 20 to 30 seconds, then just reboots.

It will continue like this, until I remove the blank card. then it works just fine.

If I do not have the Navionics card in - and just this blank one, it starts and operates just fine.

Any ideas around this?

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] a125 reboots on second card insertion - jdiesel - 07-15-18 03:54 PM

RE: [CA11] a125 reboots on second card insertion - Chuck - Raymarine - Moderator - 07-16-18, 10:54 AM

RE: [CA11] a125 reboots on second card insertion - jdiesel - 07-16-18, 10:29 PM

RE: [CA11] a125 reboots on second card insertion - Chuck - Raymarine - Moderator - 07-17-18, 08:54 AM

RE: [CA11] a125 reboots on second card insertion - jdiesel - 07-17-18, 12:17 PM

RE: [CA11] a125 reboots on second card insertion - Chuck - Raymarine - Moderator - 07-17-18, 12:39 PM

RE: [CA11] a125 reboots on second card insertion - jdiesel - 08-02-18, 11:11 PM

RE: [CA11] a125 reboots on second card insertion - Chuck - Raymarine - Moderator - 08-03-18, 07:58 AM

User(s) browsing this thread: 1 Guest(s)