Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] a125 reboots on second card insertion
07-17-18, 08:54 AM
Post: #4
RE: [CA11] a125 reboots on second card insertion
jdiesel,

Thanks for providing the requested additional data. It appears that the MFD has been updated with the latest LightHouse II software. As specified previously, the reported issue is quite atypical, cannot be duplicated here, and as such, we can only advise the following:
- Test the MFD with the Sonar Logging and SonarChart Live features disabled within the Chart application pane.
- Use the Navionics Chart Installer to erase and then re-populate the chart card's contents with Freshest Data updates and then test
- Perform a System Settings & Data Reset & then re-test

Should none of the above correct the reported issue, then it would be recommended that the MFD be sent to Raymarine’s Product Repair Center to be bench checked / serviced. If doing so, be certain to include the chart card and microSD card(s) which produced the problem.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] a125 reboots on second card insertion - Chuck - Raymarine - Moderator - 07-17-18 08:54 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)