Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] C-classic to Axiom Pro
07-18-18, 12:00 AM (This post was last modified: 07-19-18 03:41 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] C-classic to Axiom Pro
I have a newly aquired (used) boat with an older C-Series (classic) MFD installed including a black box sonar believed to be a DSM30 or 300. I would like to upgrade the system to a new Axiom Pro unit. Will any variant of the Axiom Pro drive the existing transducers used with by the older DSM unit, perhaps via an adapter cable?
Find all posts by this user
Quote this message in a reply
07-19-18, 03:40 PM (This post was last modified: 07-19-18 03:41 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] C-classic to Axiom Pro
Welcome to the Raymarine Forum zelatore,

Should the currently installed transducer's plug be directly interfaced to the DSM250, DSM30, or DSM300 which is presently interfaced to the C-Series Classic MFD, then this transducer may be adapted (part #A80496) to be mated to the 1kW Transducer socket of an Axiom Pro RVX MFD.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)