Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Connect a GA150 to an Axiom MFD?
07-19-18, 11:37 AM (This post was last modified: 07-19-18 11:51 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Connect a GA150 to an Axiom MFD?
Hello is it possible to connect a GA150 to and Axiom MFD like 9", if so what would I need?
Find all posts by this user
Quote this message in a reply
07-19-18, 12:01 PM
Post: #2
RE: [CA11] Connect a GA150 to an Axiom MFD?
Welcome to the Raymarine Forum Dan,

Unlike the Axiom Pro and Axiom XL MFDs, the interface panel of the Axiom MFDs does not feature a socket to accommodate the GA150 GPS Antenna. If seeking an external GPS source for an Axiom MFD, it is recommended that a Raystar 150 GPS sensor be used. Like all products supporting SeaTalk2/NMEA 2000 communications, these products are each designed to be interfaced as a spur to the system's powered and properly terminated SeaTalkng / NMEA 2000 backbone. Please click here to view a FAQ addressing how a simple backbone may be constructed.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)