The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] New Axiom Pro 12 Connection to HS5
07-23-18, 01:34 AM (This post was last modified: 07-26-18 03:00 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] New Axiom Pro 12 Connection to HS5
Today I re-installed a warranty replacement Axiom 12 Pro connecting the unit to an HS5. I also have a FLIR and an Axiom 12 Standard connected to the HS5. The green light on the HS5 does not illuminate for the PRO. The port connected to the Axiom 12 Std as well as the Filr port are both illuminated. When I move the cable from the Axiom 12 to the Axiom Pro the light goes off on the HS2. I have updated all the software on both systems. What do I do as the unit is new so I suspect there is something I need to do in the configuration screens. Any help wou
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] New Axiom Pro 12 Connection to HS5 - Pgiani@pacbell.net - 07-23-18 01:34 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)