Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] ST50 wind to NMEA 2000
07-23-18, 10:58 AM (This post was last modified: 07-27-18 10:42 AM by Chuck - Raymarine - Moderator.)
Post: #1
[TG11] ST50 wind to NMEA 2000
Hello,

I am planning to integrate an old ST50 wind instrument into my NMEA 2000 network and need confirm my understanding after reading this sticky thread (http://forum.raymarine.com/showthread.php?tid=229)

Can I directly interface the ST50 instrument seatalk cable connection with a device like the actisense NGW-1 ISO (stripping the seatalk cable and using a terminal block to connect both ends)?

Thanks
Find all posts by this user
Quote this message in a reply
07-27-18, 12:18 AM (This post was last modified: 07-27-18 10:42 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [TG11] ST50 wind to NMEA 2000
Hello Laurent,

ST50 instruments talk Seatalk (Raymarine-proprietary), whereas the NGW-1 talks NMEA0183 and NMEA2000. NMEA0183 and Seatalk are very different - an NGW-1 won't talk Seatalk, don't try it or you could perhaps damage the NGW-1. Seatalk is not just 0183 under another name.

You need a Raymarine Seatalk1-SeatalkNG convertor, part E22158, to convert ST50 to NMEA2000/STNG.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
07-27-18, 08:29 AM (This post was last modified: 07-27-18 12:28 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [TG11] ST50 wind to NMEA 2000
Thanks Tom!
Find all posts by this user
Quote this message in a reply
07-29-18, 09:02 PM
Post: #4
RE: [TG11] ST50 wind to NMEA 2000
No problem.
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)