Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] Remote MFD Compatibility
07-27-18, 11:23 AM (This post was last modified: 07-30-18 02:13 AM by Tom - Raymarine - Moderator.)
Post: #1
Remote MFD Compatibility
I have an A128 integrated with my radar, AIS, autopilot and fish finder at my nav station. If I add a C95 MFD to the Raynet ng network can I access the radar, AIS and fish finder data from that MFD?
Find all posts by this user
Quote this message in a reply
07-30-18, 02:17 AM
Post: #2
RE: Remote MFD Compatibility
Yes, if you connect them together over Raynet, all data will be shared (NG is something different; you can connect both to SeatalkNG for redundancy, but only the Master display will actively talk on that network and will share data over Raynet to the other.)

Each of these displays only has 1 network port, so depending on what radar and fishfinder options you have you might not have free ports to use to connect the displays together, in which case you'd need an HS5 Raynet network switch to join everything together.

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)