Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] EV1 Linearization via e7 MFD or ST6002

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] EV1 Linearization via e7 MFD or ST6002
08-03-18, 08:20 AM
Post: #8
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] EV1 Linearization via e7 MFD or ST6002
Tom,

Q. If I do not lock the compass will the deviation continue to be updated as we sail on?
A. Yes. BTW - for maximum performance of the autopilot, it is recommended that the maximum deviation sensed for the installation location of the EV-1/EV-2 CCU be less than ten degrees.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] EV1 Linearization via e7 MFD or ST6002 - Chuck - Raymarine - Moderator - 08-03-18 08:20 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication