Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] E120 Seatalk1 to NMEA 2000 conversion requirements
08-20-18, 09:39 PM (This post was last modified: 08-21-18 07:50 AM by Chuck - Raymarine - Moderator.)
Post: #7
RE: [CA11] E120 Seatalk1 to NMEA 2000 conversion requirements
The junction box has only a terminal strip.

The Seatalk devices list has a line with a device ID but no NAME
5) Unknown device ID = 208D v2.04 (I suspect it is the GPS antenna)

Would this be consistent with an RC120 or other Raymarine GPS receiver - If not, is there ANY association between the ID and a device type or class?

Based on the discussion so far, I think I can conclude that the device is a Seatalk device - TRUE? If so, the software uorae should work without any network reconfiguration -(likely)TRUE ??

Thanks for your patience, but I really don't want to disable the system with the software upgrade.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] E120 Seatalk1 to NMEA 2000 conversion requirements - bruce@westcut.com - 08-20-18 09:39 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)