Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Need help with E-series MFD sonar depth
08-02-18, 07:38 PM (This post was last modified: 08-03-18 11:58 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Need help with E-series MFD sonar depth
I have an E series E62355 with lighthouse 2. I have a problem with the sonar feature after about 150 ft or so. The transducer is installed thru Hull. Is there another transducer or something I can add on to get better depth with the unit?
Find all posts by this user
Quote this message in a reply
08-03-18, 12:02 PM (This post was last modified: 08-03-18 12:03 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Need help with E-series MFD sonar depth
Welcome to the Raymarine Forum Coomz,

While it is possible that the reported problem may be resulting from a failure of the MFD's fishfinder circuitry or that of the interfaced transducer, the symptom reported may also be indicative of the incorrect type of transducer or use of the incorrect transducer frequency. Please identify the model of transducer which has been interfaced to the e7D MFD's Transducer socket. In doing so, it may be helpful to have you attach a photo which clearly shows all information which has been printed onto the transducer's tag.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)