Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Cables ?
04-22-16, 09:18 AM
Post: #1
Cables ?
I am connecting my digital radar dome to my new C95 MDF. My previous MDF was a E80 with a RJ45 connection. What cable do I need to connect the radar to the C95?


Thanks,
Phil..
Find all posts by this user
Quote this message in a reply
04-22-16, 10:27 AM
Post: #2
RE: Cables ?
Welcome to the Raymarine Forum saustop,

If the radome had been properly interfaced to the E80 MFD's SeaTalkhs socket, the Digital Radar Cable w/RJ45 plug would have been interfaced to a SeaTalkhs Crossover Coupler or SeaTalkhs Network Switch, which in turn would have been interface to the MFD's SeaTalkhs socket via an appropriate length of SeaTalkhs (M) to RJ45 (M) Cable. When replacing an E-Series Classic MFD with an a/c/e/eS/gS-Series MFD, this SeaTalkhs Cable may be adapted with an A80160 SeaTalkhs (F) to RayNet (F) Adapter to mate to the Network (Ethernet) socket of an a/c/e/eS/gS-Series MFD.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)