The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [DG] [DG] AH4000 control unit replace

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG] AH4000 control unit replace
08-17-18, 03:57 PM (This post was last modified: 08-20-18 07:33 AM by Derek - Raymarine - Moderator.)
Post: #1
KariR Offline
Junior Member
**
 		Posts: 4
Joined: Aug 2018
Reputation: 0
[DG] AH4000 control unit replace
I have an old AH4000 Wheel Drive autopilot which has served now 26 years. In later years it has suddenly switched to stand by and now the last year it totally stopped to work after a while. However, after a day or more it starts to work again for a while! I have checked all wire connections and have not find any failures. I believe that the control unit has now fulfilled its duty and needs to be replaced. The old unit is not anymore available to buy and thus I have thought to upgrade it to a newer one. The drive unit itself seems still to be ok. I would not like to spend money to buy a completely new system so I wonder if the newer Raymarine control units are compatible with the old AH4000 wheel drive unit?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[DG] AH4000 control unit replace - KariR - 08-17-18 03:57 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication