Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Tack Tick linking to Standard Horizon Chart Plotter
08-27-18, 02:39 PM (This post was last modified: 08-30-18 01:27 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Tack Tick linking to Standard Horizon Chart Plotter
I have complete cruiser package of Tacktick instruments and want to get them to read waypoint/VMG to waypoint etc from the Standard Horizon CP590 plotter.
Is it possible to link directly from the CP to the wireless interface using NMEA 0183 cables. If so which input ports do I use on the interface.
Or do I have to use a multiplexer to make the Tactic interface work.
Find all posts by this user
Quote this message in a reply
08-30-18, 01:39 PM
Post: #2
RE: [CA11] Tack Tick linking to Standard Horizon Chart Plotter
Welcome to the Raymarine Forum Ian,

As you have suggested, interfacing such devices would typically be accomplished via the Tack Tick T122 Wireless Interface. In short, the third party chartplotter's 4800 BAUD NMEA 0183 OUT+ and OUT- leads would in turn be interfaced to the T122 Wireless Interface's NMEA 0183 IN+ and IN- terminals respectively.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)