Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Grinding noise from quantum radar
08-27-18, 04:07 PM (This post was last modified: 08-29-18 03:43 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Grinding noise from quantum radar
We tied up at a dock and turned the engines off - and noticed a strange grinding/vibrating noise. On investigation we determined that it was coming from the radar unit.

The same noise was heard when we got back to our dock - I took the following video:

https://www.youtube.com/watch?v=Iv0hSGaXUdE

Whilst the radar is still functioning we are concerned that this could be a mechanical issue?
Find all posts by this user
Quote this message in a reply
08-29-18, 03:45 PM
Post: #2
RE: [CA11] Grinding noise from quantum radar
Welcome to the Raymarine Forum delsey,

When operating, the radome should be virtually silent and not making the noise portrayed within the video which you have linked. It is recommended that the radome be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Visit this user's website Find all posts by this user
Quote this message in a reply
08-30-18, 04:06 PM
Post: #3
RE: [CA11] Grinding noise from quantum radar
Thank you - we will work through our supplier to progress this issue.
Find all posts by this user
Quote this message in a reply
08-31-18, 09:21 AM
Post: #4
RE: [CA11] Grinding noise from quantum radar
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)