[CA11] Water Temperature Conflict

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Water Temperature Conflict

10-04-18, 12:47 PM

Post: #5

trush640 Offline

Junior Member

Posts: 6
Joined: Nov 2016
Reputation: 0

RE: [CA11] Water Temperature Conflict

Just a quick update for those that may also have this issue...

Disconnecting the Airmar transducer from the VesselView system was very easy.

The transducer is wired into the starboard engine on my setup. Following the engine wiring diagram, I was able to identify the four-wire plug that was sending the transducer info into the VesselView network.

Once I unplugged the transducer, the proper water temperature was displayed, as Chuck mentioned.

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Water Temperature Conflict - trush640 - 08-29-18, 10:50 AM

RE: [CA11] Water Temperature Conflict - Chuck - Raymarine - Moderator - 08-29-18, 01:33 PM

RE: [CA11] Water Temperature Conflict - trush640 - 08-29-18, 04:00 PM

RE: [CA11] Water Temperature Conflict - Chuck - Raymarine - Moderator - 08-30-18, 08:00 AM

RE: [CA11] Water Temperature Conflict - trush640 - 10-04-18 12:47 PM

RE: [CA11] Water Temperature Conflict - Chuck - Raymarine - Moderator - 10-04-18, 12:57 PM

User(s) browsing this thread: 1 Guest(s)