Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG] ST4000 installation
09-03-18, 07:11 PM (This post was last modified: 09-05-18 10:07 AM by Derek - Raymarine - Moderator.)
Post: #1
[DG] ST4000 installation
Hello: I have a like new ST4000 tiller autopilot and fluxgate compass, but no control head. Can I control it with my e7D MFD running Lighthouse? Or is there another control head that I canbuy?

Thank you in advance.
Judy
Find all posts by this user
Quote this message in a reply
09-05-18, 10:14 AM
Post: #2
RE: [DG] ST4000 installation
Hi Judy,

Thank you for your enquiry,

The ST4000 Autopilot had all the computing functions and power electronics contained in the ST4000 Control head and so without it, all you have is a drive unit and compass sensor. The e7D will not be able to control or activate the drive unit directly.

The alternative is to purchase the EV1 sensor and the ACU100, these components will connect to the tiller drive unit and to the e7D, the compass sensor from the old ST4000 will not be required.

regards

Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)