Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Upgrading MFD to C95
05-03-16, 11:17 AM
Post: #11
RE: Upgrading MFD to C95
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
05-04-16, 07:50 AM (This post was last modified: 05-04-16 12:43 PM by Chuck - Raymarine - Moderator.)
Post: #12
RE: Upgrading MFD to C95
Thanks Again Chuck!
The two files you provided did the trick.

Phil...
Find all posts by this user
Quote this message in a reply
05-04-16, 12:43 PM
Post: #13
RE: Upgrading MFD to C95
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
05-16-16, 09:38 AM
Post: #14
Thumbs Up RE: Upgrading MFD to C95
Hi Chuck,

I want to let you know I completed the upgrade and all components are working !
Thanks for all your help.

One item I noticed, the differential GPS setting is grayed out (unavailable to enable)
Is this normal? I'm using the Raymarine 125 GPS antenna with the C95.

Phil...
Find all posts by this user
Quote this message in a reply
05-16-16, 02:13 PM
Post: #15
RE: Upgrading MFD to C95
Phil,

This is indeed normal. The Raystar 125 GPS Sensor will default to Satellite Differential operation, typically yielding a HDOP of approximately 1.0 when positioned where the GPS sensor has an unobstructed view of the skies overhead. Unlike when a Raystar 125 GPS Sensor is interfaced to a MFD having a SeaTalk interface (not to be confused with a SeaTalkng or SeaTalkhs interface), the mode of a SeaTalk GPS sensor cannot be remotely switched from Satellite Differential (SD) to non-SD mode ... the GPS sensor will remain in SD mode.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)