Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] A95 Upgrade
09-19-18, 02:26 PM
Post: #10
RE: [CA11] A95 Upgrade

Unlike the a95 MFD, the Axiom MFDs feature only one Ethernet Network (RayNet) socket. Accordingly, a HS5 RayNet Network Switch will need to be installed onboard. The CP470 and SR150 will be unplugged from the a95 MFD and will instead be plugged into the HS5 RayNet Network Switch. The Axiom MFD will be interfaced to the HSt RayNet Network Switch via an appropriate length of RayNet (F) to RayNet (F) Cable. When a radome is later added to the system, the Digital Radar Cable will also be connected to the HS5 RayNet Network Switch.

Raymarine offers the A06075 39.4in (1.0m) DeviceNet (F) to SeaTalkng Spur Cable to support interfacing the Axiom MFD to a spur socket within a powered and properly terminated SeaTalkng / NMEA 2000 backbone which has been constructed from SeaTalkng networking components.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
[CA11] A95 Upgrade - WWMS - 09-17-18, 01:40 PM
RE: [CA11] A95 Upgrade - WWMS - 09-17-18, 04:19 PM
RE: [CA11] A95 Upgrade - WWMS - 09-18-18, 01:22 PM
RE: [CA11] A95 Upgrade - Chuck - Raymarine - Moderator - 09-19-18 02:26 PM
RE: [CA11] A95 Upgrade - WWMS - 09-19-18, 03:27 PM
RE: [CA11] A95 Upgrade - WWMS - 09-19-18, 04:45 PM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)