Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Connecting multiple Axiom MFDs
09-21-18, 10:03 AM (This post was last modified: 09-21-18 11:08 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Connecting multiple Axiom MFDs
If there is a FAQ thread on how to properly connect multiple Axiom9 MFD's in a system, can you please point me to it? If a FAQ does not exist, can you please provide guidance on how to do so?

Can I simply connect each Axiom using a devicenet-STng spur cable into my STNG backbone and then give each Axiom a 12v power supply? Or is there an alternate way to do it.

Thanks

Dave
Find all posts by this user
Quote this message in a reply
09-21-18, 11:08 AM
Post: #2
RE: [CA11] Connecting multiple Axiom MFDs
Welcome to the Raymarine Forum Dave,

Please click here to view a FAQ addressing this subject.
Find all posts by this user
Quote this message in a reply
09-21-18, 11:33 AM (This post was last modified: 09-21-18 02:14 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] Connecting multiple Axiom MFDs
Thank you Chuck!
Find all posts by this user
Quote this message in a reply
09-21-18, 02:14 PM
Post: #4
RE: [CA11] Connecting multiple Axiom MFDs
You're welcome.
Find all posts by this user
Quote this message in a reply
09-25-18, 01:51 PM (This post was last modified: 09-25-18 03:00 PM by Chuck - Raymarine - Moderator.)
Post: #5
RE: [CA11] Connecting multiple Axiom MFDs
Chuck,

Can I interface the 3 Axiom's and Raydome directly to each other using RayNet (F) cables plugged into the existing DeviceNet (M)/power pigtail cables coming out of the Axioms as shown, or will I need to go through an HS5 switch?

Thanks

Dave
Find all posts by this user
Quote this message in a reply
09-25-18, 03:17 PM (This post was last modified: 09-25-18 03:18 PM by Chuck - Raymarine - Moderator.)
Post: #6
RE: [CA11] Connecting multiple Axiom MFDs
Dave,

The diagram which you have provided is incorrect in the following ways:
- the diagram indicates that the Axiom MFDs feature up to two Ethernet (RayNet) Network sockets ... unlike Axiom Pro MFDs which have two Ethernet Network sockets, Axiom MFDs feature a single Ethernet Network socket. In short, your MFDs alone do not have a sufficient number of Ethernet Network sockets to interface them to one another and to the radome.
- The MFD's power cable features a SeaTalkng/NMEA 2000 leg, not a RayNet leg.
- as shown, the Axiom MFDs will be unable to share resources (ex. radar, cartography, fishfinder, etc.) with one another.
- the cable labeled RayNet - STng should be labeled DeviceNet to SeaTalkng
- the five port block to which the RS125 has been interfaced should be labeled SeaTalk to SeaTalkng Converter.

The diagram should include a HS5 RayNet Network Switch to which each Axiom MFD and the Digital Radar Cable / Quantum Data Cable should be connected.
Find all posts by this user
Quote this message in a reply
09-26-18, 08:47 AM
Post: #7
RE: [CA11] Connecting multiple Axiom MFDs
Very helpful Chuck. I was confused and thought the second leg of the Axiom power was a Raynet leg. Does this look better?

Dave
Find all posts by this user
Quote this message in a reply
09-26-18, 09:11 AM
Post: #8
RE: [CA11] Connecting multiple Axiom MFDs
Dave,

Your diagram now appears to be correct.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)