Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] C120 Upgrade
10-04-18, 07:33 AM (This post was last modified: 10-04-18 09:58 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] C120 Upgrade
I presently have a C12 MFD with DSM300 and r199 2kw transducer which I am using for my Plotter and Sounder. I would like to expand and install another MFD to use as my sounder display. My questions are-
What MFD is compatible with my r199 2kw transducer?

What do I need to convert from DSM300 to make the display compatiable.

Thanks
Find all posts by this user
Quote this message in a reply
10-04-18, 10:04 AM
Post: #2
RE: [CA11] C120 Upgrade
Welcome to the Raymarine Forum whadapair,

If seeking a MFD with a 12" screen, then it would typically be recommended that an E70368 Axiom 12 MFD or an E70482 Axiom Pro S 12 MFD and a CP370 Sounder Module be considered for use with your currently installed transducer. It may also be possible to interface your C120 MFD to the system via a SeaTalk to SeaTalkng Converter Kit to permit sharing of GPS data, depth, alarms, and system state data between the to systems.
Find all posts by this user
Quote this message in a reply
10-08-18, 08:04 AM
Post: #3
RE: [CA11] C120 Upgrade
Thank you so much for the information.
Find all posts by this user
Quote this message in a reply
10-08-18, 08:19 AM
Post: #4
RE: [CA11] C120 Upgrade
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)