Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG11] RD424 E52067 Compatibolity with eS128
10-13-18, 03:10 PM (This post was last modified: 10-15-18 12:54 PM by Chuck - Raymarine - Moderator.)
Post: #1
[TG11] RD424 E52067 Compatibolity with eS128
Is the RD424 E52067 radome compatible with the eS128 MFD?
Find all posts by this user
Quote this message in a reply
10-15-18, 01:46 AM (This post was last modified: 10-15-18 12:54 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [TG11] RD424 E52067 Compatibility with eS128
Sorry, that's an analogue radome, whereas all of our multifunction displays after E-series Classic require digital radars. eS128 can use any of our Digital radome, HD Digital radome, HD or SHD Open Array, Magnum Open Array (limited features) or Quantum 1 radars.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
10-15-18, 10:44 AM (This post was last modified: 10-15-18 12:54 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [TG11] RD424 E52067 Compatibolity with eS128
Is there a digital version of the RD424?

The outside of the dome that I am looking at has "Digital" on it and the owner says that it has the ethernet connection. I've attached pictures from Craigs List.

I can't figure out how to attach the pictures. Here is the Craigs list address.

https://washingtondc.craigslist.org/nva/...99382.html

Thanks,

Amby N
Find all posts by this user
Quote this message in a reply
10-16-18, 02:06 PM
Post: #4
RE: [TG11] RD424 E52067 Compatibolity with eS128
(10-15-18 01:46 AM)Tom - Raymarine - Moderator Wrote:  Sorry, that's an analogue radome, whereas all of our multifunction displays after E-series Classic require digital radars. eS128 can use any of our Digital radome, HD Digital radome, HD or SHD Open Array, Magnum Open Array (limited features) or Quantum 1 radars.

Regards,
Tom

Tom,

Did you get my reply from yesterday?

Amby N
Find all posts by this user
Quote this message in a reply
10-17-18, 01:09 AM
Post: #5
RE: [TG11] RD424 E52067 Compatibolity with eS128
Hello Amby,

That listing says RD424D, which is compatible. E62067 is an RD424 without the D. E52067 is not compatible, RD424D (part E92131, E92132 or T70167.) The D in the model name is important, it means Digital. Where did the part number you quoted, E52067 come from?
The cable in the photo is a digital scanner cable, if the info in the ad is legitimate then that is compatible with eS128.

Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)