Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] LifeTag works, but will not show on A98mfd chart
10-17-18, 01:30 PM
Post: #2
RE: [CA11] LifeTag works, but will not show on A98mfd chart
Welcome to the Raymarine Forum jwashmon,

Please note that Lifetag was retired quite a while ago and support is now quite limited. Please be aware that a SeaTalk to SeaTalkng (Socket) Adapter Adapter Cable cannot be used for this purpose. A SeaTalk to SeaTalkng Converter Kit must be used for this purpose. When using this kit, the SeaTalk bus should be powered via the SeaTalk to SeaTalkng Converter. Should one have properly installed the SeaTalk to SeaTalkng Converter, then it may be possible that the software level of the Converter or of the MFD may be preventing the MOB event from being passed to the MFD. Please produce and respond with the Diagnostic...html file from your system's Data Master MFD (i.e. add as an attachment to your response).
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] LifeTag works, but will not show on A98mfd chart - Chuck - Raymarine - Moderator - 10-17-18 01:30 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)