Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG] Migrate from E80 to e127
10-23-18, 07:17 PM (This post was last modified: 10-24-18 06:57 AM by Derek - Raymarine - Moderator.)
Post: #1
[DG] Migrate from E80 to e127
I am moving from an E80 MFD to an e127 MFD and find the connectors (i.e. power) to be different. Is there an adapter or do I need to replace the existing connector?
Find all posts by this user
Quote this message in a reply
10-24-18, 07:00 AM
Post: #2
RE: [DG] Migrate from E80 to e127
Hi Jim,

The power cable connector is different and there is no adapter, so the new power cable supplied with the e127 will need to be used.

Also bear in mind the e80 communicated with the rest of the navigation instruments through SeaTalk, whereas the e127 operates on STng, so you may well need an E22158 adapter to be able to interface the pre-existing SeaTalk network to the new STng network that the e127 operates on.

Thanks
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)