[CA] [CA11] Axiom 12 3D Vision goes sideways

[Chuck - Raymarine - Moderator]

jfitch,

Thanks for the information concerning the Y-Cable. I had assumed that the RV thru-hull Y-Cable had been installed, but was seeking information regarding whether a second RV & 50kHz/200kHz Transducer Y-Cable had been installed. Now that the boat is on the hard, please take photos of the transducer installation from both outside and inside of the hull and attach them to this response. Please additionally specify whether the system had always behaved as reported or whether the skewing symptom began sometime later.