Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Is the gyroplus 2 compatible with st2000+
10-25-18, 11:41 PM (This post was last modified: 10-26-18 07:57 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Is the gyroplus 2 compatible with st2000+
Hi, I've inherited a gyroplus 2, and the manual says that its can feed accurate heading data to st4000 and later autopilot control heads. Is this also the case for earlier autopilots? I have a perfectly serviceable st2000 and dont want to change it....

Thanks for your advice.
Find all posts by this user
Quote this message in a reply
10-26-18, 08:36 AM
Post: #2
RE: [CA11] Is the gyroplus 2 compatible with st2000+
Welcome to the Raymarine Forum Yourmomm,

Unlike the S1, S2 or S3 autopilot course computers and ST4000+ / ST5000+ autopilot systems identified within the Smart Heading System's Owner's Manual, the ST2000+ neither features the ability to process NMEA 0183 HDM sentences nor to calibrate an external heading source. The heading data rate on a SeaTalk bus is 1Hz, which is much too slow for an autopilot.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)