Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] EV-100 on a powerboat?
10-30-18, 10:04 AM (This post was last modified: 10-30-18 10:04 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] EV-100 on a powerboat?
Welcome to the Raymarine Forum aequitas1916,

Unfortunately, the EV-100 Wheel Pilot is not designed for powerboats. The good news is that the EV-1 CCU, p70R Autopilot Control Head, and possibly the ACU-100 may be used with an autopilot hydraulic pump. Raymarine offers autopilot hydraulic pumps which may be applied to vessels having hydraulic steering systems. The type of autopilot pump required is dependent upon two variables ... 1) the capacity of the vessel's steering ram and 2) the type of power distributions system (12V or 24V) which are installed onboard the vessel. Upon determining the type of autopilot hydraulic pump required, it would then be possible to determine the correct model of ACU for the application. If supplied with this information, we would be able to advise accordingly.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] EV-100 on a powerboat? - Chuck - Raymarine - Moderator - 10-30-18 10:04 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)